Reinforcement HelicalRebar/ru

Изогнутая арматура

Армировать колонну

Архитектурный верстак "Arch"

Описание

This tool is part of the Reinforcement Workbench, an external workbench that can be installed with the Addon Manager.

Применение

1. Select any face of a previously created Arch Structure object.
2. Then select Helical Rebar from the rebar tools.
3. A task panel will pop-out on the left side of the screen as shown below.
4. Select the desired orientation.
5. Populate the inputs like 'Left Cover', 'Right Cover', 'Top Cover', 'Bottom Cover', 'Front Cover', 'Bent Angle', 'Bent Factor', 'Rounding' and 'Diameter' of the rebar.
6. Select the mode of distribution either 'Amount' or 'Spacing'.
   • If 'Spacing' is selected, a user can also opt for custom spacing.
7. Pick Selected Face is used to verify or change the face for rebar distribution.
8. Click OK or Apply to generate the rebars.
9. Click Cancel to exit the task panel.

Task panel for the tool

Свойства

• ДанныеSide Cover: The distance between rebar to the curved face.
• ДанныеTop Cover: The distance between rebar from the top face of the structure.
• ДанныеBottom Cover: The distance between rebar from the bottom face of the structure.
• ДанныеPitch: The pitch of a helix is the height of one complete helix turn, measured parallel to the axis of the helix.
• ДанныеDiameter: Diameter of the rebar.

See also: Arch API, Reinforcement API and FreeCAD Scripting Basics.

The Reinforcement HelicalRebar tool can be used in macros and from the Python console by using the following function:

Rebar = makeHelicalRebar(s_cover, b_cover, diameter, t_cover, pitch, structure=None, facename=None)

• Creates a Rebar object from the given structure, which is an Arch Structure, and facename, which is a face of that structure.
  • If no structure nor facename are given, it will take the user selected face as input.
• s_cover, b_cover, and t_cover are inner offset distances for the rebar with respect to the faces of the structure. They are respectively the side, bottom, and top offsets.
• diameter is the diameter of the reinforcement spiral inside the structure.
• pitch is the parameter that determines how close or far apart each spiral loop is to each other.

Пример

import FreeCAD, Draft, Arch, HelicalRebar

Circle = Draft.makeCircle(radius=250)
Structure = Arch.makeStructure(Circle)
Structure.ViewObject.Transparency = 80
FreeCAD.ActiveDocument.recompute()

Rebar = HelicalRebar.makeHelicalRebar(10, 50, 8, 50, 50, structure, "Face2")

Edition of the rebar

You can change the properties of the rebar with the following function

editHelicalRebar(Rebar, s_cover, b_cover, diameter, t_cover, pitch, structure=None, facename=None)

• Rebar is a previously created HelicalRebar object.
• The other parameters are the same as required by the makeHelicalRebar() function.
• structure and facename may be omitted so that the rebar stays in the original structure.

import HelicalRebar

HelicalRebar.editHelicalRebar(Rebar, 20, 100, 20, 20, 100)

Изогнутая арматура

Армировать колонну

Архитектурный верстак "Arch"

BIM

• 2D drafting: Sketch, Line, Polyline, Circle, Arc, Arc by 3 points, Fillet, Ellipse, Polygon, Rectangle, B-spline, Bézier curve, Cubic Bézier curve, Point

---

• 3D/BIM: Project, Site, Building, Level, Space, Wall, Curtain Wall, Column, Beam, Slab, Door, Window, Pipe, Pipe Connector, Stairs, Roof, Panel, Frame, Fence, Truss, Equipment
  • Reinforcement tools: Custom Rebar, Straight Rebar, U-Shape Rebar, L-Shape Rebar, Stirrup, Bent-Shape Rebar, Helical Rebar, Column Reinforcement, Beam Reinforcement, Slab Reinforcement, Footing Reinforcement
  • Generic 3D tools: Profile, Box, Shape builder..., Facebinder, Objects library, Component, External reference

---

• Annotation: Text, Shape from text, Aligned dimension, Horizontal dimension, Vertical dimension, Leader, Label, Axis, Axes System, Grid, Section Plane, Hatch, Page, View, Shape-based view

---

• Snapping: Snap lock, Snap endpoint, Snap midpoint, Snap center, Snap angle, Snap intersection, Snap perpendicular, Snap extension, Snap parallel, Snap special, Snap near, Snap ortho, Snap grid, Snap working plane, Snap dimensions, Toggle grid, Working Plane Top, Working Plane Front, Working Plane Side

---

• Modify: Move, Copy, Rotate, Clone, Create simple copy, Make compound, Offset, 2D Offset..., Trimex, Join, Split, Scale, Stretch, Draft to sketch, Upgrade, Downgrade, Add component, Remove component, Array, Path array, Polar array, Point array, Cut with plane, Mirror, Extrude..., Difference, Union, Intersection

---

• Manage: BIM Setup..., Views manager, Manage project..., Manage doors and windows..., Manage IFC elements..., Manage IFC quantities..., Manage IFC properties..., Manage classification..., Manage layers..., Material, Schedule, Preflight checks..., Annotation styles...

---

• Utils: Toggle bottom panels, Move to Trash, Working Plane View, Select group, Set slope, Create working plane proxy, Add to construction group, Split Mesh, Mesh to Shape, Select non-manifold meshes, Remove Shape from Arch, Close Holes, Merge Walls, Check, Toggle IFC Brep flag, Toggle subcomponents, Survey, IFC Diff, IFC explorer, Create IFC spreadsheet..., Image plane, Unclone, Rewire, Glue, Reextrude
  • Panel tools: Panel, Panel Cut, Panel Sheet, Nest
  • Structure tools: Structure, Structural System, Multiple Structures
  • IFC tools: IFC Diff..., IFC Expand, Make IFC project, IfcOpenShell update
  • Nudge: Nudge Switch, Nudge Up, Nudge Down, Nudge Left, Nudge Right, Nudge Rotate Left, Nudge Rotate Right, Nudge Extend, Nudge Shrink

---

• Additional: Preferences, Fine tuning, Import Export Preferences, IFC, DAE, OBJ, JSON, 3DS, SHP

Документация пользователя

• Начинающим
• Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
• Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования

---

• Помощь: Учебники, Видео учебники
• Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework

---

• Addons: Менеджер дополнений, Внешние верстаки, Cкрипты и макросы

---

• Hubs: Уголок пользователя, Уголок опытных пользователей, Уголок разработчиков